Fanatec Clubsport Wheel Settings for XMR

How to create cars and tracks, instructions, tips, etc

Fanatec Clubsport Wheel Settings for XMR

Postby Dan75 » Mon Sep 09, 2013 2:33 pm

Hi Guys,

I'm curious, what's your favorite Fanatec Clubsport Wheel Settings for X Motor Racing?

Best regards,
Dan.
Dan75
 
Posts: 9
Joined: Tue Sep 03, 2013 10:44 am

Re: Fanatec Clubsport Wheel Settings for XMR

Postby Eugene Cojocar » Mon Sep 09, 2013 3:09 pm

I'm afraid but I never used Fanatec wheels.
I suggest only to have a look at this topic
http://www.xmotorracing.com/forum/viewtopic.php?f=10&t=182#p669
XMR Developer
User avatar
Eugene Cojocar
 
Posts: 937
Joined: Thu Oct 18, 2012 2:49 pm

Re: Fanatec Clubsport Wheel Settings for XMR

Postby Eugene Cojocar » Fri Jan 17, 2014 10:59 am

Seems, reducing the FFB Kickback down to 0.1-0.07 can eliminate strong vibration.
In additional to it's possible to reduce the FFB Friction.
Looks like Fanatec's drivers/firmware can't handle big values of the forces magnitudes.
XMR Developer
User avatar
Eugene Cojocar
 
Posts: 937
Joined: Thu Oct 18, 2012 2:49 pm

Re: Fanatec Clubsport Wheel Settings for XMR

Postby Dan75 » Fri Jan 17, 2014 6:04 pm

Looks good, i will test it asap. Many thanks for all your work!
Dan75
 
Posts: 9
Joined: Tue Sep 03, 2013 10:44 am

Re: Fanatec Clubsport Wheel Settings for XMR

Postby andregee » Sat Feb 01, 2014 8:51 pm

Is there a fix for the strong Vibration in pipeline. Can´t drive with my CSW the demo
andregee
 
Posts: 2
Joined: Sat Feb 01, 2014 8:48 pm

Re: Fanatec Clubsport Wheel Settings for XMR

Postby Eugene Cojocar » Sat Feb 01, 2014 9:06 pm

Not yet. Fanatec doesn't want to help.
You can decrease the FFB Force (or/and FFB Lateral Force Gain and FFB Aligning Moment Gain) and FFB Friction values in the menu->options->controls->FFB/Zones as a quick-fix.
XMR Developer
User avatar
Eugene Cojocar
 
Posts: 937
Joined: Thu Oct 18, 2012 2:49 pm

Re: Fanatec Clubsport Wheel Settings for XMR

Postby andregee » Sat Feb 01, 2014 11:13 pm

Ok thank you for your answer. what a shame for fanatec. if i could help you by sending Feedback with try and error i will do that. Maybe i am blind but is it possible to set the Simulation to a 900degree steering Rotation´? I got only a linear Setting compared to the Little control wheel in the Setting menu by using 450degrees in the Driver.
andregee
 
Posts: 2
Joined: Sat Feb 01, 2014 8:48 pm

Re: Fanatec Clubsport Wheel Settings for XMR

Postby Eugene Cojocar » Sun Feb 02, 2014 6:45 am

andregee wrote:Ok thank you for your answer. what a shame for fanatec. if i could help you by sending Feedback with try and error i will do that. Maybe i am blind but is it possible to set the Simulation to a 900degree steering Rotation´? I got only a linear Setting compared to the Little control wheel in the Setting menu by using 450degrees in the Driver.


Check on the "Visual Steering Angle" in the game menu->Options->Controls->Extra. Then move the "Visual Steering Angle" slider to 450 degrees to get the full 900 degrees of rotation. The "Visual Steering Angle" means max rotation to the left or right and the full rotation = "visual steering angle" * 2.
As to Fanatec's wheel...let me think about this issue. I spent several days trying to solve this problem but without any success.
For me it looks very strange because the FFB works fine on other wheels and only on Fanatec's wheel you can get annoying vibration. At the same time all games work fine on the Fanatec's wheels. Looks like Fanatec makes an exception for XMR.
Maybe getting Fanatec's SDK will help me...
XMR Developer
User avatar
Eugene Cojocar
 
Posts: 937
Joined: Thu Oct 18, 2012 2:49 pm

Re: Fanatec Clubsport Wheel Settings for XMR

Postby GTV » Sun Feb 02, 2014 4:08 pm

It's well known that Fanatec customer support leaves much to be desired.
User avatar
GTV
 
Posts: 69
Joined: Sun Sep 08, 2013 8:30 am

Re: Fanatec Clubsport Wheel Settings for XMR

Postby Eugene Cojocar » Sun Feb 02, 2014 9:14 pm

Seems they have the same problems with the F1 2011
http://f-wheel.com/forums/index.php?topic=1402.0
XMR Developer
User avatar
Eugene Cojocar
 
Posts: 937
Joined: Thu Oct 18, 2012 2:49 pm

Next

Return to Tutorials and Guides

Who is online

Users browsing this forum: No registered users and 1 guest

cron