Page 1 of 2

Fanatec Clubsport Wheel Settings for XMR

PostPosted: Mon Sep 09, 2013 2:33 pm
by Dan75
Hi Guys,

I'm curious, what's your favorite Fanatec Clubsport Wheel Settings for X Motor Racing?

Best regards,
Dan.

Re: Fanatec Clubsport Wheel Settings for XMR

PostPosted: Mon Sep 09, 2013 3:09 pm
by Eugene Cojocar
I'm afraid but I never used Fanatec wheels.
I suggest only to have a look at this topic
http://www.xmotorracing.com/forum/viewtopic.php?f=10&t=182#p669

Re: Fanatec Clubsport Wheel Settings for XMR

PostPosted: Fri Jan 17, 2014 10:59 am
by Eugene Cojocar
Seems, reducing the FFB Kickback down to 0.1-0.07 can eliminate strong vibration.
In additional to it's possible to reduce the FFB Friction.
Looks like Fanatec's drivers/firmware can't handle big values of the forces magnitudes.

Re: Fanatec Clubsport Wheel Settings for XMR

PostPosted: Fri Jan 17, 2014 6:04 pm
by Dan75
Looks good, i will test it asap. Many thanks for all your work!

Re: Fanatec Clubsport Wheel Settings for XMR

PostPosted: Sat Feb 01, 2014 8:51 pm
by andregee
Is there a fix for the strong Vibration in pipeline. Can´t drive with my CSW the demo

Re: Fanatec Clubsport Wheel Settings for XMR

PostPosted: Sat Feb 01, 2014 9:06 pm
by Eugene Cojocar
Not yet. Fanatec doesn't want to help.
You can decrease the FFB Force (or/and FFB Lateral Force Gain and FFB Aligning Moment Gain) and FFB Friction values in the menu->options->controls->FFB/Zones as a quick-fix.

Re: Fanatec Clubsport Wheel Settings for XMR

PostPosted: Sat Feb 01, 2014 11:13 pm
by andregee
Ok thank you for your answer. what a shame for fanatec. if i could help you by sending Feedback with try and error i will do that. Maybe i am blind but is it possible to set the Simulation to a 900degree steering Rotation´? I got only a linear Setting compared to the Little control wheel in the Setting menu by using 450degrees in the Driver.

Re: Fanatec Clubsport Wheel Settings for XMR

PostPosted: Sun Feb 02, 2014 6:45 am
by Eugene Cojocar
andregee wrote:Ok thank you for your answer. what a shame for fanatec. if i could help you by sending Feedback with try and error i will do that. Maybe i am blind but is it possible to set the Simulation to a 900degree steering Rotation´? I got only a linear Setting compared to the Little control wheel in the Setting menu by using 450degrees in the Driver.


Check on the "Visual Steering Angle" in the game menu->Options->Controls->Extra. Then move the "Visual Steering Angle" slider to 450 degrees to get the full 900 degrees of rotation. The "Visual Steering Angle" means max rotation to the left or right and the full rotation = "visual steering angle" * 2.
As to Fanatec's wheel...let me think about this issue. I spent several days trying to solve this problem but without any success.
For me it looks very strange because the FFB works fine on other wheels and only on Fanatec's wheel you can get annoying vibration. At the same time all games work fine on the Fanatec's wheels. Looks like Fanatec makes an exception for XMR.
Maybe getting Fanatec's SDK will help me...

Re: Fanatec Clubsport Wheel Settings for XMR

PostPosted: Sun Feb 02, 2014 4:08 pm
by GTV
It's well known that Fanatec customer support leaves much to be desired.

Re: Fanatec Clubsport Wheel Settings for XMR

PostPosted: Sun Feb 02, 2014 9:14 pm
by Eugene Cojocar
Seems they have the same problems with the F1 2011
http://f-wheel.com/forums/index.php?topic=1402.0